Right Crankcase - Honda CRF450X 2005 Service Manual

CRANKCASE/CRANKSHAFT /TRANSMISSION/BALANCER
13-20
Clean and apply locking agent to the countershaft
bearing set plate screws.
Install the screws with the set plates and tighten the
screws to the specified torque.
TOROUE: 10 N'm (1.0 kgf·m , 7 Ibf·tt)
Apply grease to new countershaft and balancer
shaft oil seal lips.
Install a new balancer shaft oil seal to the crankcase
until it is flush with the crankcase surface.
Install a new countershaft oil seal to the specified
depth below the crankcase surface as shown .
BALANCER SHAFT OIL SEAL:
0 - 1.0
mm
(0 - 0.04
in)
COUNTERS HAFT OIL SEAL:
RIGHT CRANKCASE
Remove the socket bolts and set plates.
Remove the countershaft bearing, mainshaft bear·
ing and shift drum bearing .
Remove the bolts and set plates.
Remove the balancer shaft bearing.
..
lit .....
OIL SEALS
on' T< ' <OT
PLATES