Headlight Removal/Installation (After 07); Tail Light Inspection; Tail Light Removal/Installationn - Honda CRF450X 2005 Service Manual

LIGHTS/METER/SWITCHES
REMOVAL/INSTALLATION (After '07)
Remove the front visor (page 3-6).
Remove the vertical beam adjusti ng sc rew, spring,
mounting screws and headlight unit.
Installation is in the reverse order of removal.
TORQUE :
Headlight mounting screw:
0.7 N'm (0.1 kgf-m, O.5Ibf.ft)
Adjust the headl ight aim (page 4-31)'
TAIL LIGHT
INSPECTION
20-6
Start the engine and check the t aillight il lumination.
If any LED does not tu rn on, replace the tail light
unit.
REMOVALIINSTALLA TION
Remove the fol lowing:
- Seat (page 3-3)
- Side covers (page 3-3)
Disconnect the tai llight wi re connectors.
Remove the screws and wire clamps.
Remove the screws, stay and taillight unit.
Installation is in the reverse order of removal.
TORQUE:
Taillight mounting s crew:
4.2 N·m (0.4 kgf·m , 3.1 Ibf.ft)
Ta illight wire clamp screw:
0.7 N·m (0.1 kgf·m , 0.5Ibf.ft)
HEADLIGHT UNIT
TAIL LIGHT UNIT
CONNECTORS
•
•