Honda CRF450X 2005 Service Manual page 304

FRONT WHEEL/SUSPENSION/STEERING
loosen the fork top bridge pinch bolts.
When the fork is ready to be disassembled, remove
the handlebar and holders (page 14-32) and loosen
the fork damper using the following procedure.
When disassembling the fork leg, turn the rebound
and compression adjust ers countercl ockwise t o the
softest position to prevent damaging the adjust-
ment needle (be su re to record the number of turns
from the starting position).
Dono / use8
loosen the fork damper using the special tool, but
crescent or do not remove it yet.
adjuSfable wrench
10
loosen rhe fork
TOOL:
damper;/r couldbe
Lock nut w rench, 50 mm
do_
07WMA·KZ30100
l oosen the fork bonom bridge pinch bolts and pull
the fork leg down and out.
14-14
REBOUND AU.JU'
FORK DAMPER