Hpsd (Honda Progressive Steering Damper): After 07 Inspection; Spherical Bearing Replacement - Honda CRF450X 2005 Service Manual

r
J
MeaslJre rh e
damper rod length
with the 'inside'
jaws of
8
vermor
caliper.
FRONT WHEEL/SUSPENSION/STEERING
INSPECTION
Remove the steering damper (page 14-38),
Visuallv inspect the steering damper for wear or
damage.
Check the following :
- Damper case for deformation or oil leakage
- Damper rod for bending or damage
Replace the damper case or damper rod if neces-
sary.
Fully extend and compress the damper rod by hand.
Release the damper rod then check that it extends
to its maximum length.
STANDARD (maximum length):
117.55 - 118.35 mm (4.628 - 4.659 in )
Check the damper rod for smooth operation.
If the damper rod operation is not smooth, check
the damper rod for bends or damage.
If the damper rod does not extend to maximum, dis-
assemble the steer ing damper (page 14-40).
Check the spherical bearings for wear or damage .
Move the spherical bearing with your finger. The
SPHERICAL BEARING
spherical bearing should move smoothly and qui-
L=D~A~M~P~E~R.:.:.R=O=D,--
_ _ _ __ _ _ _ _ _ _ ---"
etly.
Replace the spherical bearing if it does not move
smoothly or quietly.
Install the steering damper (page 14-38).
SPHERICAL BEARING REPLACEMENT
Remove the steering damper (page 14-38 ).
Remove the stopper ring.
Press the spherical bearing out of the
mou nts.
damper
SPHERICAL BEARING
14-39