Swingarm Removal - Honda CRF450X 2005 Service Manual

REAR WHEEL/SUSPENSION
Install the drive chain roller with the . ..... mark facing
out.
Tighten the nut to the specified torque.
TORQUE: 12 N'm f1 ,2 kgf·m, 9 Ibf.ft)
Install the step bracket assembly and mounting
bolts.
Tighten the upper mounting bolt to the specified
torque.
TORQUE: 55 N'm (5.6 kgf·m . 41Ibf·ft)
Tighten the lower mounting bolt to the specified
torque.
TORQUE: 30 N'm (3.1 kgf·m, 22 Ibf.ft)
Insta ll the left step. spring, joi nt pin, washer and
new cotter pin securely as shown.
SWINGARM
REMOVAL
Remove the following:
- Rear wheel (page 15-8)
- Brake pedal (page 16-24)
Do nor disconnect Remove the rear brake cal iper from the sl ide rai l on
the hydraulic
line. the swingarm.
WAS HER
-
I
NOTICE
I
Do not suspend the brake caliper from the brake
L.."' .....
~
hose. The brake hose may be damaged.
15-36
BRI"E CALIPER
•
•