Brake Pedal Removal; Brake Pedal Installation - Honda CRF450X 2005 Service Manual

HYDRAULIC BRAKE
Install the brake caliper/bracket assembly onto the
swingarm by aligning the bracket tab with the slide
rail on the swingarm .
Install the rear wheel (page 15-13).
Install the brake pad (page 16-10),
Push the brake hose eyelet to the stopper on the cal·
iper. then tighten the oi l bolt to the specified torque.
TORQUE; 34 N'm (3.5 kgf·m , 25 Ibf.ft)
Install the caliper guard and tighten th e bolts
securely.
Fill and bleed the rear brake hydrauliC system (page
16-7).
BRAKE PEDAL
REMOVAL
16-24
Remove the clip, brake pedal pivot bolt, washer and
dust seals.
Remove the return spring.
Remove and discard the cotter pin.
Remove the joint pin and brake pedal.
INSTALLATION
Connect the brake pedal to the push rod.
Install the joint pin and a new cotter pin.
BRAKE CAILlPI'RlI'RA.CKI E T ASSEMBLY
T
WASHER
DUST SEALS
-
•