Stator Removal; Flywheel Removal - Honda CRF450X 2005 Service Manual

STATOR
REMOVAL
Remove the left crankcase cover (page 12-4).
Remove the bolts, ignition pulse generator and
grommet from the left crankcase caver.
Remove the bolts and stator.
INSTALLATION
Place the stator/ignition pulse generator into the left
crankcase cover.
Apply liquid sealant to the wire grommet seating
surface and install the grommet into the groove in
the left crankcase cover.
Apply locking agent to the ignition pulse generator
and stator mounting bolt threads.
Tighten the ignition pulse generator and stator
mounting bolts to the specified torque.
TORQUE:
Ignition pulse generator mounting bolt:
5.2 N 'm (0.5 kgf·m, 3.8 Ibf.ft)
Stator mounting bolt:
4.7 N 'm (O.S kgf·m, 3.5 Ibf.ft)
Install the left crankcase cover (page 12-6).
FLYWHEEL
REMOVAL
Remove the left crankcase cover (page 12-4).
Hold the flywheel with the spedal tool and remove
the nut and washer.
TOOL:
Flywheel holder
07725·0040001 or
07AMB-KRNA100
Remove the flywheel using the special tools.
TOOLS:
Flywheel puller
Flywheel puller adapter
U.S.A. TOOLS :
Flywheel pull er
Adapter 12 x 1.25 mm
070MC-HP10100 and
070MG-KSE0100
070MC-HP1A100 and
07AMC· MEBA110
ALTERNATOR
12-5