6.4.4 How to Install or Remove Memory Modules
1
Turn off the server and the connected devices, and unplug all power cables
from the outlet.
2
Remove the side cover.
"6.2 Removing and Attaching Covers" (pg.136)
3
Touch a metal part of the server to discharge static electricity.
4
Remove the ventilation duct.
Pull out the stopper of the ventilation duct. Press the latch down and remove the duct by lifting it
up as shown in the figure below.
Ventilation duct
Stopper
(Pull out)
5
Remove the memory board.
Latch
PRIMERGY TX300 S4 User's Guide
155