Fujitsu PRIMERGY TX300 S4 User Manual page 248

Chapter 8 Operation and Maintenance
4
When a message prompts you to press the [F2] key, press the [F2] key.
A message prompts you to insert the ASR floppy disk.
5
Insert the ASR floppy disk, and follow the window instructions.
6
Install a driver.
Drivers to be installed vary depending on the array controller in use. Install an appropriate driver
described below.
• When a SAS controller card (Integrated Mirroring SAS) is used:
LSI Logic Fusion-MPT SAS Driver
• When a SAS array controller (MegaRAID SAS) card is used:
LSI Logic MegaRAID SAS RAID Controller Driver
For the procedures to install driver, refer to the website below.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
7
Follow the window instructions to restore the system.
• When prompted to change the floppy disk, follow the instructions and change it.
• If a message appears indicating that the driver has not passed Windows Logo testing to verify
its compatibility with Windows, select [Yes] to continue the installation procedure.
• When prompted to insert media, set the backup media created beforehand and follow the
messages to continue.
Notes on Automated System Recovery
Automated System Recovery does not restore data files.
248