How To Install/Remove Memory Modules - Fujitsu Primergy RX100 S2 User Manual

Chapter 7 Installing Internal Options

7.3.3 How to Install/Remove Memory Modules

1
Turn off the power and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
2
Touch a metal part of the server to discharge static electricity.
3
Install or remove memory modules.
• Installing
Insert a memory module properly into the memory slot. The levers close.
If the levers are not closed completely, push them with your fingers.
• Removing
Open the levers on both ends.
Lever
4
Check that the memory module is inserted all the way.
5
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.164)
168
Align notch
• Make sure not to open the clips outward too quickly because the memory
module may pop up, which could cause damage.
• An improperly engaged memory module could cause a fire. Do not insert the
memory module on the wrong side.