Switch Block Settings - Fujitsu PRIMERGY TX300 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.1 Switch Block Settings

This section explains switch block settings of the server.
Switch block location
The switch block is located on the baseboard as shown below.
Switch block settings
Switch block settings are as follows.
ON
OFF
1 2 3 4
Switch
number
1 BIOS Recovery
2 Password Skip
3 BIOS Write Protect
4 FDD Write Protect
When setting the switch block, make sure to turn off the power and operate it without the power cable.
192
Switch block
table: Switch block setting
Initial
Function
setting
OFF
OFF
OFF
OFF
Description
Starts from stored BIOS information.
Deletes the password set on BIOS.
Write-protects BIOS.
Write-protects a floppy disk.