Fujitsu PRIMERGY TX300 S4 User Manual page 27

o LAN cable removal lever
To disconnect the LAN cable attached to the LAN port 1, release the lock of the lever by pulling
down the lever and pull out the cable.
LAN cable
If there is difficulty due to the cable type, hold a tab on the top of the LAN cable connector with
a flathead driver, and pull out the LAN cable.
Depending on the device, LAN cable removal lever may not be provided. Also in this case,
hold the tab of the LAN cable connector with a flathead driver, and pull out the LAN cable. The
tab is fragile and easy to break. Be careful not to apply too much pressure.
p Side cover key
The side cover cannot be opened when locked. It is recommended that the cover be locked to
prevent access to the inside of the server without permission of the responsible personnel.
PRIMERGY TX300 S4 User's Guide
27