How To Install/Remove Memory Module - Fujitsu Primergy BX620 S4 User Manual

Chapter 7 Installing Internal Options

7.4.3 How to Install/Remove Memory Module

This section explains how to install and remove memory modules.
1
Turn off the Server Blade.
→ "3.3 Turning Off the Server" in "BX600 S3 Blade Server System Unit Hardware Guide"
2
Touch a metal part of the Chassis to discharge static electricity.
3
Remove the Server Blade from the Chassis to install a memory module.
→ "4.2 Installing Server Blades" in "BX600 S3 Blade Server System Unit Hardware Guide"
4
Remove the top cover.
"7.2 Removing and Attaching the Top Cover" (p.138)
5
Install or remove memory modules.
When installing
Insert a memory module properly into the memory slot. The levers close. If the levers are not
closed completely, push them with your fingers.
Lever
When removing
Open the levers on both ends.
6
Check that the memory module is inserted all the way.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (p.138)
150
Align
notch
• Make sure not to open the clips outward too quickly because the memory
module may pop up, which could cause damage.
• An improperly engaged memory module could cause a fire. Do not insert the
memory module on the wrong side.