Fujitsu PRIMERGY TX300 S4 User Manual page 60

Chapter 3 OS Installation
14
Configure settings for RAID Management Tool (ServerView RAID).
For details, refer to the manuals in Array Controller Document & Tool CD.
• Setting an array administrator account
A Windows user account is required when using ServerView RAID. Create a group named
"raid-adm", and create an account with any name for an array administrator within the group
"raid-adm".
• Setting HDD Check Scheduler
When using a SAS array controller card (MegaRAID SAS), modify the settings of HDD Check
Scheduler if necessary. It has been set for 12 o'clock every day as a default setting.
• Setting Battery Recalibration Scheduler
When using a SAS array controller card (MegaRAID SAS) together with a battery backup unit,
modify the settings of Battery Recalibration Scheduler if necessary. It has been set for 11
o'clock on the first day of every month as a default setting.
15
Configure settings for ServerView.
Refer to "2.4 Setting after Installation" in "ServerView User's Guide" to configure the necessary
settings.
The server setup and OS installation have been completed.
Refer to "Chapter 4 Operations after OS Installation" ( pg.77) and perform necessary procedures before
starting server operations.
60