Lan Driver Advanced Setup [Bacs]; Net Framework Installation - Fujitsu PRIMERGY TX300 S4 User Manual

4.6 LAN Driver Advanced Setup
[BACS]
BACS is an integrated GUI application consisting of programs such as Broadcom
Advanced Server Program (BASP) that provides load balancing features, etc., by
teaming up multiple adapters.
BACS is used in the following situations:
• When using the teaming (load balance) function between onboard LANs
• When setting up a VLAN using the onboard LAN
• When performing advanced setup of the onboard LAN
You cannot install BACS in an environment where Windows Server 2008 Server Core is installed.
On Windows Server 2008, teaming function cannot be performed between a LAN card and the
onboard LAN attached to the server.
You cannot use the diagnostic function that can be executed from the [Diagnostics] tab in BACS.
When using Intel® PROSet ( pg.119)
®
Use Intel PROSet to perform the following advanced setups of a LAN card when:
• Using the teaming function between LAN cards
• Setting up a VLAN using a LAN card
• Performing the other advanced settings of a LAN card

4.6.1 .NET framework Installation

To use Broadcom Control Suite on Windows Server 2003, ".NET framework" must be installed.
If a later version than ".NET framework2.0" is not installed, install it by following the procedure below.
1
Execute the following file contained in PRIMERGY Startup Disc.
[CD/DVD drive]:\PROGRAMS\General\Microsoft\NET framework\dotnetfx35.exe
The installer starts up, and installation wizard for .NET framework 3.5 appears.
2
Check the contents, select [ACCEPT], and click [Install].
Installation starts.
3
When the installation completion window appears, click [Exit].
PRIMERGY TX300 S4 User's Guide
105