Cleaning The Floppy Disk Drive - Fujitsu PRIMERGY TX300 S4 User Manual

Chapter 8 Operation and Maintenance
Cleaning procedure
1
Remove the cover from the base of the mouse.
Remove the cover by rotating it in the direction of the arrow.
2
Remove the ball and rinse it with water.
Flip the mouse over to remove the ball. Afterwards, wash it with water.
3
Clean the inside of the mouse.
Wipe the inside of the mouse, the roller, and the bottom cover with a damp cloth.
4
Replace the ball and the cover.
After the ball and inside of the mouse are dry, put back the ball and the cover.

Cleaning the floppy disk drive

Long-term use of the floppy disk drive attributes to accumulation of dust on the device head (the part
which reads/writes data). A dirty head can impair the ability to read/write data to/from a floppy disk
correctly. Clean the head once every three months.
Cleaning procedure
1
Insert the cleaning floppy disk into the floppy disk drive.
2
Access the floppy disk drive from the OS.
• For Windows, access it with Explorer.
• For Linux, execute the "mount" or "dd" commands of the floppy disk drive.
The process is completed when an error message such as to indicate that the disk cannot be read
is displayed.
3
Remove the cleaning disk from the floppy disk drive.
220