Advanced System Configuration Submenu - Fujitsu PRIMERGY TX300 S4 User Manual

7.2.8 Advanced System Configuration Submenu

This submenu appears when you select [Advanced System Configuration] from the [Advanced] menu.
It is for additional settings.
Main Advanced
Advanced System Configuration
BIOS Work Space Location:
Memory Redundancy:
Memory Throttling:
Memory Power Mode:
High Bandwidth:
CPU Frequency(GHz):
CPU Thermal Management:
Enhanced SpeedStep:
CPU Halt Mode:
Enhanced Idle Power State:
Core Multi-Processing:
CPU Mismatch Detection:
CPU Timeout Counter:
Limit CPUID functions:
NX Memory Protection:
CPU MC Status Clear:
Virtualization Technology:
Hardware Prefetch:
F1 Info
Exit
Esc
Item
BIOS Work Space
Location
Memory Redundancy
Memory Throttling
Memory Power Mode
High Bandwidth
CPU Frequency (GHz)
CPU Thermal Management
Enhanced SpeedStep
CPU Halt Mode
Enhanced Idle Power State
PhoenixBIOS Setup Utility
Security Server
[Expansion ROM Area]
[Disabled]
[Disabled]
[Performance]
[Enabled]
[Automatic]
[Enhanced]
[Disabled]
[Enhanced]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Next Boot]
[Disabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: Advanced System Configuration submenu
Setting
Expansion ROM Area
(Unchangeable)
• Disabled (Initial value)
• Sparing
• Mirroring
• Disabled (Initial value)
• Enabled
• Performance (Initial
value)
• Energy
Enabled (Unchangeable)
Automatic (Unchangeable)
Enhanced (Unchangeable)
• Disabled (Initial value)
• Enabled
Enhanced (Unchangeable)
• Disable (Initial value)
• Enable
PRIMERGY TX300 S4 User's Guide
Exit
Item Specific Help
Setup Defaults
F9
Description
Sets memory space for BIOS operation.
Sets whether to use the memory redundant function.
This setting is for memory control.
This setting is for memory power control.
Sets FSB (Front Side Bus).
Sets the CPU clock frequency.
Configures the CPU internal settings.
Sets whether to enable the power saving function.
This item may not appear depending on the CPU
type installed.
Note:
When using Linux, do not change the
setting: it must be set to "Disabled".
Configures the CPU internal settings.
This setting is for the power control when OS is in
idle.
203