How To Install Memory Modules - Fujitsu Primergy TX120 User Manual

Chapter 7 Installing Hardware Options

7.3.3 How to Install Memory Modules

1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the cover.
"7.2 Removing and Attaching the Side Cover" (pg.162)
3
Touch a metal part of the server to discharge static electricity.
4
Remove a reinforcing bar.
5
To replace the memory module, open outward the retention clips on both sides
of the slot.
166
It may be difficult to install the memory modules depending on the location of the memory slots
because of the peripheral devices. In this case, remove a unit bay. For removing it, refer to
"7.6.3 How to Install an Internal DAT72 Unit" ( pg.179).
• Make sure not to open the clips outward too quickly because the
memory module may pop up, which could cause damage.