Fujitsu PRIMERGY TX300 S4 User Manual page 195

2
Use the [↑] [↓] keys to select the exit mode.
To save configurations before exiting
Place the cursor over [Save Changes & Exit], and press the [Enter] key.
The message "Save configuration changes and exit now?" appears.
To exit without saving configurations
Place the cursor over [Discard Changes & Exit], and press the [Enter] key.
When changes are made, the message "Configuration has not been saved! Save before exiting?"
appears.
3
Use the [←] [→] keys to select [Yes] or [No], and press the [Enter] key.
When selecting [Save Changes & Exit]
Select [Yes] to exit.
After configuration is saved, the BIOS Setup Utility closes, and the server restarts.
Select [No] to continue.
The display returns to the BIOS Setup Utility screen.
When selecting [Discard Changes & Exit]
Select [Yes] to save configuration before exiting.
The BIOS Setup Utility closes, and the server restarts.
Select [No] to exit without saving configuration.
The BIOS Setup Utility closes, and the OS starts.
PRIMERGY TX300 S4 User's Guide
195