Ipmi Submenu - Fujitsu PRIMERGY TX300 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.2.10 IPMI Submenu

This submenu appears when you select [IPMI] from the [Advanced] menu.
It is for the integrated Remote Management Controller (iRMC) settings.
Main Advanced
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
>
System Event Log
>
SDRR Browser
> LAN Settings
F1
Esc Exit
Item
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
System Event Log
SDRR Browser
LAN Settings
206
PhoenixBIOS Setup Utility
Security Server
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select > Sub-Menu
table: IPMI submenu
Setting
Displays the percentage of the system event log (SEL) stored.
• Disabled (Initial value)
• Enabled
Overwrite (Unchangeable)
Enabled (Unchangeable)
Displays contents of the SEL.
The referable system event logs in this submenu are for reference only. For details on
the system event logs, refer to "8.3 System Event Log" ( pg.237).
Displays data for each sensor.
Configures the LAN settings of the Remote Management Controller port. This setting
is required when you perform the remote operation using RemoteControlService.
" LAN Settings submenu" (pg.207)
Exit
Item Specific Help
Setup Defaults
F9
Description
Sets whether to delete the logs stored in the SEL.
Configures the log settings when the SEL becomes full.
Sets whether to synchronize the internal clock of iRMC
with the system time.