Ata Controller Config Submenu - Fujitsu PRIMERGY TX300 S4 User Manual

Item
USB Host Controller
USB 2.0 Host
Controller
USB BIOS Supported
Devices
USB Boot Delay
USB BIOS Hot-Plug
USB Front
USB Rear
ATA Controller
Config
Diskette Controller
Mouse Controller
Onboard Video
LAN Controller
LAN 1 Remote Boot
LAN 2 Remote Boot

ATA Controller Config submenu

This submenu is for Serial ATA settings.
Item
S_ATA Mode
Primary IDE Channel
Secondary IDE Channel
Tertiary IDE Channel
Quaternary IDE Channel
table: Peripheral Configuration submenu
Setting
Enabled (Unchangeable)
Enabled (Unchangeable)
Auto (Unchangeable)
0 s (Unchangeable)
Enabled (Unchangeable)
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
Configures additional settings.
" ATA Controller Config submenu" (pg.201)
Enabled (Unchangeable)
Auto Detect (Unchangeable)
Enabled (Unchangeable)
LAN 1 & 2 (Unchangeable)
• Disabled (Initial value)
• PXE
• iSCSI
• Disabled (Initial value)
• PXE
• iSCSI
table: ATA Controller Config submenu
Setting
Compatible (Unchangeable)
Enabled (Unchangeable)
Enabled (Unchangeable)
Enabled (Unchangeable)
Enabled (Unchangeable)
PRIMERGY TX300 S4 User's Guide
Description
Sets whether to use the USB controller (2.0 or 1.1
standard).
Sets the types of the BIOS-supported USB device.
Sets the waiting time for the startup from the USB
device.
Sets whether to enable hot-plug of the USB device
used for BIOS.
Sets whether to use the USB port on the front side of
the server.
Sets whether to use the USB port on the rear side of
the server.
Sets whether to enable the floppy disk controller.
Sets whether to use the mouse connected to the
mouse connector.
Sets whether to enable the onboard video controller.
Sets whether to enable the onboard LAN controller.
Sets whether to enable the OS startup through LAN.
Sets whether to enable the OS startup through LAN.
Description
Sets the mode of the Serial ATA controller.
Not supported.
Sets whether to enable primary IDE Channel.
Sets whether to enable secondary IDE Channel.
Sets whether to enable tertiary IDE Channel.
Sets whether to enable quaternary IDE Channel.
201