Attaching the front cover
When attaching the front cover, place it by aligning the intrusion switches on the front side of the server
to the hole of the cove properly.
Further, make sure that the upper hooks properly fit to the server before placing the cover.
6.2.2 Removing the Top Cover of the Rack Type
For the Rack Conversion kit (optional), remove the top cover.
1
Open the rack door.
"1.4.2 Opening the Rack Door" (pg.32)
2
Remove all the cables connected to the server.
3
Remove the retaining screws used to fasten the server to the rack.
PRIMERGY TX300 S4 User's Guide
Align them and fit.
139