Main Menu - Fujitsu PRIMERGY TX300 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.2.2 Main Menu

The [Main] menu appears when you start BIOS Setup Utility.
This menu is for setting time, date, and drives.
System Time:
System Date:
Diskette A:
Standard IDE
Boot Options
Base Memory:
Extended Memory:
Item
System Time
System Date
Diskette A
Standard IDE
Boot Options
Base Memory
Extended Memory
196
[HH:MM:SS]
[MM:DD:YYYY]
[1.4M]
[DV-28S-V-(PM)]
640K
1022M
table: Main menu
Setting
Present time The system time is set in "hours: minutes: seconds"
format. The hours should be based on a 24-hour clock.
For example, 6:30:00 P.M. is set as "18", "30", "00".
Note:
Present date The system date is set in "month: day: year" format.
For example, December 25, 2007 is set as "12", "25",
"2007".
• None Sets the type of Floppy Disk Drive A (recording
• 360K density and drive size).
• 1.2M
• 720K
• 1.4M (Initial value)
Sets the connected IDE device type and its operation mode.
"7.2.3 Standard IDE Submenu" (pg.197)
Configures the system startup settings.
"7.2.4 Boot Options Submenu" (pg.198)
Displays available base memory size less than 1 MB.
Displays available memory size larger than 1 MB.
<Tab>, <Shift-Tab>, or
<Enter>, selects field.
7
Description
If a highly precise system time is necessary,
install a network synchronized time system
such as NTP.