How To Install The Cpu - Fujitsu PRIMERGY TX300 S4 User Manual

6.3.2 How to install the CPU

To install a CPU more easily, lay down the server so that baseboard is in a horizontal position.
When using the tower type server, it is recommended to install a CPU after laying down the server.
injury
1
Turn off the server and the connected devices, and unplug all power cables
from the outlet.
2
Remove the side cover.
"6.2 Removing and Attaching Covers" (pg.136)
3
Touch a metal part of the server to discharge static electricity.
4
Remove the ventilation duct.
Pull out the stopper of the ventilation duct. Press the latch down, and remove the duct by lifting it
up as shown in the figure below.
Ventilation duct
Stopper
(Pull out)
• Be careful not to pinch your fingers between the server and a table when
laying down the tower type server.
• Lay down the server so that the baseboard is in a horizontal position.
Latch
PRIMERGY TX300 S4 User's Guide
143