Chapter 6 Installing Internal Options
5
Press the [F10] key, and save settings. Then exit BIOS Setup Utility.
After the system restart, memory sparing function is enabled.
6.4.4 How to Install Memory Modules
1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the top cover.
"6.2.1 Removing the Top Cover" (pg.112)
3
Touch a metal part of the server to discharge static electricity.
4
Remove the memory board.
Slide the lever on the top of the memory board to the direction of the arrow (1), and open the
lever (2), and then lift the memory board out (3).
126
(1)
(2)
Memory board
(3)