Memory Status Submenu - Fujitsu PRIMERGY TX300 S4 User Manual

7.2.15 Memory Status Submenu

This submenu appears when you select [Memory Status] from the [Server] menu.
It is for setting whether to allow the use of the installed memory modules.
Main Advanced
Memory Module 1A:
Memory Module 1B:
Memory Module 2A:
Memory Module 2B:
Memory Module 3A:
Memory Module 3B:
Memory Module 4A:
Memory Module 4B:
Memory Module 1C:
Memory Module 1D:
Memory Module 2C:
Memory Module 2D:
Memory Module 3C:
Memory Module 3D:
Memory Module 4C:
Memory Module 4D:
Help
F1 Select Item
Esc Exit Select Menu
Item
Memory Module 1A
Memory Module 1B
Memory Module 2A
Memory Module 2B
Memory Module 3A
Memory Module 3B
Memory Module 4A
Memory Module 4B
Memory Module 1C
Memory Module 1D
Memory Module 2C
Memory Module 2D
Memory Module 3C
Memory Module 3D
Memory Module 4C
Memory Module 4D
PhoenixBIOS Setup Utility
Security Server Exit
Memory Status
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
-/+ Change Values
Enter Select > Sub-Menu
table: Memory Status submenu
Setting
Enabled (Unchangeable)
PRIMERGY TX300 S4 User's Guide
Item Specific Help
F9 Setup Defaults
F7 Save and Exit
Description
Sets whether to enable the use of memory modules
in memory slots.
When "Disabled" or "Failed" is displayed, change
to "Enabled" after replacing a memory.
213