Removing And Attaching Covers; Removing Covers - Fujitsu PRIMERGY TX300 S4 User Manual

Chapter 6 Installing Internal Options

6.2 Removing and Attaching Covers

Remove covers to install peripheral devices. Perform the following procedures to
remove covers.

6.2.1 Removing Covers

1
Turn off the server and the connected devices, and unplug all power cables
from the outlet.
2
Slide the drive cover up.
When the drive cover is locked with the drive cover key, unlock and slide it up.
"1.4.1 Sliding the Drive Cover" (pg.31)
3
Remove the hard disk cover.
Pull the hard disk cover (1), and lift it up to remove (2).
(2)
(1)
Hard disk cover
136
• Before removing or attaching covers, turn off the server, all peripheral devices,
and any other connected devices. Also unplug all power cables from the
outlet. Failure to do so can cause electric shock. ("1.4.4 Turning Off the
Server" ( pg.35)).