How To Install/Remove Memory Modules - Fujitsu PRIMERGY RX300 S2 User Manual

7.4.3 How to Install/Remove Memory Modules

1
Turn the power off and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
2
Touch a metal part of the server to discharge static electricity.
3
Remove the ventilation system cover.
Pull up and remove the ventilation system cover.
4
To replace a memory module, open the levers outward on both sides of the slot.
Lever
• Make sure not to open the clips outward too quickly because the memory
module may pop up, which could cause damage.
PRIMERGY RX300 S2 User's Guide
Ventilation s
7
185