Preparation For Using Remote Management Controller - Fujitsu 1PRIMERGY RX600 S4 User Manual

Appendix
E.2 Preparation for Using Remote Management
Controller
To enable the Remote Management Controller, perform the following procedure.
• Reconfiguring the BIOS settings
• Connecting the Server to a PC
Reconfiguring the BIOS settings
When using the function of the Remote Management Controller, perform the following BIOS Setup
Utility settings.
1
Turn on the server. Press the [F2] key during POST to start up BIOS Setup
Utility.
2
Select the [Server] menu – the [IPMI] submenu – [LAN Settings], and set the
each item.
For the detailed setting items, refer to "7.2.18 IPMI Submenu" ( pg.177).
3
From the [Exit] menu, select [Saving Changes & Exit] to exit BIOS Setup Utility.
Save the setting information of set parameters using the Server Management Tools. For details, refer
to "4.3 Storing the System Configuration Information" ( pg.84).
Connecting the server to a PC
Connect the server to a PC using a LAN cable.
[Server rear]
[PC rear]
234
LAN cable
HUB
LAN port
Remote Management Controller port