Fujitsu 1PRIMERGY RX600 S4 User Manual page 133

5
Remove the memory cover from the memory board.
Release the latches at the bottom of the memory board (1), and lift the cover up (2).
Memory cover
6
Install/remove memory modules.
1. Open outward the levers on both sides of the memory slot, and remove a dummy
memory module or a memory module to be replaced.
Dummy memory
(1)
(2)
Bottom of memory board
• Make sure not to open the levers outward too quickly because
the memory module may pop up, which could cause damage.
PRIMERGY RX600 S4 User's Guide
133