Fujitsu 1PRIMERGY RX600 S4 User Manual page 88

Chapter 4 Operations after OS Installation
2
Click [ServerStart V6.711].
The [Fujitsu Siemens ServerStart] window appears.
3
Check the checkbox of [Classic] only, and click [OK].
The Setup window appears.
4
Click [Next].
The [License Agreement] window appears.
5
Select [I accept the license agreement], and click [Next].
The [User Information] window appears.
88
The message "Do you want to run or save this file?" may appear depending on the OS in use.
Follow as below.
1. Click [Run].
A message appears that "The publisher could not be verified. Are you sure you want to
run this software?"
2. Click [Run].
Execute "SeStSetup.exe" in the disk when [Fujitsu ServerStart Setup] window does not
appear.