Fujitsu 1PRIMERGY RX600 S4 User Manual page 123

5
Remove the dummy heat sink.
Turn the four fastened screws in the direction of the arrow, and remove them.
Dummy heat sink
6
Release the lever on the CPU socket.
Pull up to open the socket lever fully. A CPU cannot be installed unless the socket lever is fully
open.
Socket lever
• The socket lever opens by about 135 degrees. Be sure to open
the socket lever fully to release it. If the socket lever is not fully
open during CPU installation, the CPU may be damaged.
PRIMERGY RX600 S4 User's Guide
123