Fujitsu 1PRIMERGY RX600 S4 User Manual page 76

Chapter 4 Operations after OS Installation
4
Click the [Advanced] tab, and click [Settings] in [Startup and Recovery].
The [Startup and Recovery] window appears.
5
Complete the settings as follows:
1. In the [Write debugging information] section, select the memory dump file type.
• Complete memory dump
The whole system memory information is recorded to the memory dump file.
• Kernel memory dump
Only kernel memory is recorded to the memory dump file.
• Small memory dump (64KB)
Minimum information is recorded to the memory dump file.
Each time a fatal error occurs, a new file is created in the directory specified in [Small
dump directory].
2. In [Dump file] or [Small dump directory], specify the directory to save the memory
dump file, with its full path.
For kernel memory dump or complete memory dump, when you check the box of the
[Overwrite any existing file], debugging information is overwritten to the specified file
every time.
6
Click [OK] to close the [Startup and Recovery] window.
7
Click [OK] to close the [System Properties] window.
76