Fujitsu 1PRIMERGY RX600 S4 User Manual page 36

Chapter 1 Overview
Inserting a CD/DVD
1
Make sure the server is turned on, and press the CD/DVD eject button.
The CD/DVD tray comes out a little.
2
Pull the CD/DVD tray open.
3
Place the CD/DVD with the label side up at the center of the tray.
Support the CD/DVD tray with your hand, and place the CD/DVD until it clicks.
CD/DVD tray
4
Close the CD/DVD tray.
Push the tray gently until it clicks into position.
36
CD/DVD eject button
CD/DVD
Do not close the CD/DVD tray with the improperly placed CD/DVD. It may damage the CD/
DVD or the drive.
Do not touch the lens of the CD/DVD drive.