Fujitsu 1PRIMERGY RX600 S4 User Manual page 53

2
Insert the ServerStart floppy disk supplied with the server. Make sure that "on
local drive (floppy/USB stick)" and "A:" are selected, and click [Continue].
Set the ServerStart floppy disk in the write-enabled state.
When installing the OS without using the ServerStart floppy disk, select [No status backup],
and click [Next]. When configuring RAID by using ServerStart, you cannot select [No status
backup].
The [Initialization of ServerStart core running] window appears, and the ServerStart initialization
process starts. Depending on hardware configuration, this process may take a few minutes. After
completion, the license agreement window appears.
PRIMERGY RX600 S4 User's Guide
53