Fujitsu 1PRIMERGY RX600 S4 User Manual page 91

3
Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
For creation on the server
Check that a USB floppy disk drive is connected before turning on the server.
1
Turn on the server, and insert PRIMERGY Startup Disc.
ServerStart starts up. The select-media window for the configuration file appears.
2
Select [No status backup], and click [Next].
The [Initialization of ServerStart core running] window appears, and the initialization operation
launches. In some cases, initialization operation may take a few minutes, depending on hardware
configuration. After completion, the license agreement window appears.
PRIMERGY RX600 S4 User's Guide
91