C External Floppy Disk Drive (Usb) Notes On Usage - Fujitsu 1PRIMERGY RX600 S4 User Manual

C External Floppy Disk Drive (USB)
Notes on Usage
The section explains notes on the usage of USB connected floppy disk drive.
Notes on floppy disk drive recognition at server startup
If a USB floppy disk drive, with a floppy disk inserted, is not connected at server startup, BIOS cannot
recognize the USB floppy disk drive.
When installing Windows/Linux, or when using Windows Server 2003 Automatic System Recovery
(ASR), make sure to connect the USB floppy disk drive with a floppy disk inserted before the server
startup.
Notes on floppy disk media exchange recognition when installing
Windows manually and at system recovery
When performing system recovery using Windows Server 2003 Automatic System Recovery (ASR),
also when installing Windows manually, the floppy disk media replacement is not recognized.
Therefore, system recovery or installation may fail since the device driver is not loaded properly.
If the floppy disk access LED on the USB floppy disk drive is not lit and the floppy disk is not accessed
although you press the [Enter] key following the instruction on the screen, follow the procedure below.
1
Eject the floppy disk, wait for two seconds or longer, and then press the [Enter]
key several times.
2
Insert the floppy disk, wait for two seconds or longer, and then press the [Enter]
key.
3
If the floppy disk cannot be accessed, repeat the procedures above.
PRIMERGY RX600 S4 User's Guide
227