Power Menu - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 7 Configuring Hardware and Utilities
Item
TPM (Security Chip)
Setting
Security Chip
Current TPM State
Change TPM State

7.2.12 Power Menu

This menu is for server power settings.
Main Advanced
Power-on Source
LAN :
Wake Up Timer :
Wake Up Time :
Wake Up Mode :
Power Failure Recovery :
F1 Info
Esc Exit
Item
Power-on Source
LAN
Wake Up Timer
Wake Up Time
Wake Up Mode
170
table: Security menu
Setting
Press the [Enter] key to display the TPM (Security Chip) Setting submenu window.
• Disabled (Initial value)
• Enabled
Enabled and Deactivated
• No Change
• Enabled & Activate
• Disabled & Deactivate
• Clear
Phoenix TrustedCore(tm) Setup Utility
Security Power
[BIOS Controlled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
[Previous State]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Power menu
Setting
BIOS Controlled (Unchangeable)
• Disabled
• Enabled (Initial value)
Disabled (Unchangeable)
[00:00:00]
• Daily (Initial value)
• Monthly
Description
Sets whether to enable Security Chip.
Appears when [Security Chip] is "Enabled".
Sets a TPM state. This item appears when [Security
Chip] is "Enabled", and you can set the state.
Exit
Server Boot
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
This setting is for power-on.
Sets whether to enable the power to be turned on via
LAN.
Sets whether to turn on the power at a certain time or
after a certain time has passed. A separate program
is required to set startup time.
Sets the startup time when [Wake Up Timer] is used.
Sets the startup mode when [Wake Up Timer] is
used.