Preparation For Using Remote Management Controller - Fujitsu Primergy RX300 S4 User Manual

D.2 Preparation for Using Remote Management
Controller
To enable the Remote Management Controller, perform the following procedure.
• Configuring the BIOS
• Connecting the Server to a PC
Configuring the BIOS
To use the function of the Remote Management Controller, perform the following setting using the
BIOS Setup Utility.
1
Turn on the server. Press the [F2] key during POST to start up the BIOS Setup
Utility.
2
Select the [Advanced] menu – [IPMI] – the [LAN Settings] submenu, and set
the each item.
For the detailed setting items, refer to "
3
From the [Exit] menu, select [Saving Changes & Exit] to exit the BIOS Setup
Utility.
Save the setting information of set parameters using the Server Management Tools. For details, refer
to "4.3 Storing the System Configuration Information" ( p.84).
Connecting the server to a PC
Connect the server to a PC using a LAN cable.
Server (Rear)
Personal computer
PRIMERGY RX300 S4 User's Guide
LAN Settings submenu" ( p.198).
Service LAN port
HUB
LAN cable
LAN port
257