System Event Log; How To Refer To Event Logs; Deleting The System Event Log - Fujitsu 1PRIMERGY RX600 S4 User Manual

8.3 System Event Log

This section explains how to refer to and operate system event logs.

8.3.1 How to Refer to Event Logs

ServerView S2 is used for reference of system event logs. A summary of reference procedures is
described below. For details such as how to start up ServerView, refer to "ServerView User's Guide".
1
Start up ServerView S2.
2
From the ServerList, click the server to be referred.
3
On the menu list on the left side, select [Configuration] – [Recovery].
The list of all the system event logs is displayed.
Web interface of Remote Management Controller may be used for the reference of system
event logs. To use the Remote Management Controller, refer to "Appendix E Remote Manage-
ment Controller" ( pg.233).

8.3.2 Deleting the System Event Log

Use BIOS Setup Utility to delete the system event logs.
1
Start up BIOS Setup Utility.
"7.2.1 Starting and Exiting BIOS Setup Utility" (pg.157)
2
On the [Server] menu, select the [IPMI] submenu.
3
Set [Clear System Event Log] item to "Enabled".
4
Save the configured value, and exit BIOS Setup Utility.
PRIMERGY RX600 S4 User's Guide
205