Turning On The Server - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 1 Overview
2
Turn the handle in the direction of the arrow, and pull it.
Unless you are inserting/removing media or turning on/off the power, keep the door closed. Keeping
the door closed blocks electric waves from cell phones, etc.
Do not lose the key. If the key is lost, contact an office listed in the "Contact Information" of "Start
Guide".

1.4.2 Turning On the Server

32
Turn and then pull
• Do not move, strike, or shake the server when it is turned on. This can damage
the hard disk in the server and cause data loss.
• Turn on the server when the temperature is in its operating environment range
(10-35°C). For details about the operating environment, refer to "Start Guide"
and "Safety Precautions".
When operating the device outside of this operating environment, the server
may operate improperly, damage data etc.
Furthermore, Fujitsu cannot be held responsible for any related damage,
malfunction, or loss of data, etc.
• The fans rotate at high speed immediately after the server is turned on, but this
is not defective. When the temperature is in the server's operating environment
range (10-35°C), they start to rotate at normal speed later.
• Be sure to wait for 10 seconds or more after shutdown before turning on the
server.