Teaming - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 4 Operations after OS Installation
4
Select one of the following, and click [Next].
The choices to be displayed vary depending on the Intel
• "Driver and Intel
• All of the following: "Driver", "Intel
Network Service"
5
Click [Install].
6
Click [Finish].

4.6.2 Teaming

Teaming types
Teaming has the following types.
Adapter Fault Tolerance (AFT)
Adapter Fault Tolerance (AFT) is a technology and provides link redundancy by using multiple LAN
ports. When a failure occurs in the link being in use (Primary Link), the communication continues by
switching the process to the standby link (Secondary Link) without interrupting. For AFT, all ports in
the team must be connected to the same switch.
Adaptive Load Balancing (ALB)
Adaptive Load Balancing (ALB) is a technology that distributes the transmitting and receiving data to
multiple LAN ports to improve the performance in addition to redundancy function of AFT (When
"Receive Load Balancing (RLB)" in advanced setting is set to [Disabled], the reception is done only in
the Primary Link). For ALB, all ports in the team must be connected to the same switch.
Switch Fault Tolerance (SFT)
Switch Fault Tolerance (SFT) is a redundancy function equal to AFT in configuration when LAN ports
are connected to a separate switch. SFT switches the link to be used between LAN ports and switches
that are connected to the LAN ports when a failure occurs.
However, failures in the links outside of the switches, which are indicated with , or
below, can not be detected.
PRIMERGY
102
®
PROSet/Advanced Network Service"
®
PROSet for Windows device manager", and "Advanced
←
Switch
®
PROSet version you install.
in the figure
→
↓
Switch