Table of Contents
Advertisement
IN GROUP/OUT OF GROUP
If your keyset is assigned to a station ring group, you can remove your keyset from
the group and then put it back in. While you are out of the group, you can receive
calls to your extension number but not calls to the group number. If you have an
IO GRP (IN/OUT GRP) button with the group number assigned.
•
Press the IO GRP (IN/OUT GRP) button.The button indicator will be lit steady
when your keyset is in the group.
•
Press the IO GRP (IN/OUT GRP) button again to exit the group and the indi-
cator will go blank. Repeat as necessary.
If you do not have an IO GRP (IN/OUT GRP) button:
•
Dial the IO GRP (IN/OUT GRP) access code number ________________, then
the group number, then 0 to exit the group or 1 to enter the group.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press Speaker button.
The IO GRP (IN/OUT GRP) button can include an extender to indicate the specif-
ic group that this button will affect. This means that if you are in multiple groups,
you can decide for which groups you will receive calls.
62
CUSTOMIZING YOUR KEYSET
AME PASSWORD
This feature allows customers using the AME feature to enable password protec-
tion. This will prevent unauthorized users from listening to your messages being
left. The passcode is the same as your station passcode. This feature only applies if
there is a Samsung Voicemail card installed in the system and your keyset has a
programmed AME button.
•
With the handset on-hook, press Transfer and then dial 110.
•
Dial 101 to turn on AME PASSCODE or 100 to turn it off.
•
Press Transfer to store your selection.
AUTO CAMP-ON
This option allows intercom calls to be automatically camped on, if possible, when
a busy station is called.
•
With the handset on-hook, press Transfer and then dial 110.
•
Press 081 to turn Camp-On on or 080 to turn it off.
•
Press Transfer to store your selection.
SELECT RING TONE
Each SMT-i5210 user can select from a variety of ring tones.
From the LCD:
•
Press Menu button, scroll to Phone, press OK.
•
Scroll to Sound option and press OK.
•
Select Ring Tone and press OK—OR—you may dial 1 and immediately enter
the option.
•
Use Navigation button to scroll through the available ring tones and press
OK or Save soft button to store your selection.
•
Press End soft button to return to idle screen.
CHANGE YOUR PASSCODE
From the factory, your station passcode is 1234.You can change your station pass-
code whenever you desire.
•
While on-hook, press Transfer and then dial 101.
•
Dial your old passcode.
•
Dial a new passcode (must be four characters). You can use 0–9.
Home Page
63
Hide quick links:
Advertisement
Chapters
Table of Contents
