Samsung OfficeServ SMT-i5243 User Manual page 19

OfficeServ 7030
TECHNICAL MANUAL
OPTION
10
AME PASSCODE
11
DISP SPD NAME
12
CID REVIEW ALL
13
SECURE OHVA
14 NOT AVAILABLE IN THE USA
15 AUTO ANS CO
ENBLOCK 2LCD
Only Affects 2-
16
Line Display IP
Phones
17 STN NO RING
18 FEATURE TONE
19 RCV GPU INFO
NAME VALUE
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
1.17
DESCRIPTION
Require user to enter their AME
password to listen o messages as they
are being recorded.
Messages being recorded will always
be audible.
Display the Speed Dial bin name
instead of the dialed number when
calling to a Speed Dial number.
Display the dialed number when
calling to a Speed Dial number.
Store all calls in the CID Review block.
Store only missed calls in the CID
Review block.
Receive Off-Hook Voice Announce
(OHVA) audio through the handset.
Receive OHVA audio through the
speakerphone.
Automatically answer CO calls when
the keyset is set for AUTO ANSWER
MODE in MMC 103.
Do not automatically answer CO calls
regardless of AUTO ANSWER MODE
setting in MMC 103.
Require the user to press SEND to dial
the call when 2 LINE ENBLOCK is set to
ENABLE in MMC 861.
Dial calls soon as digits are entered.
Do not ring on incoming calls, only
flash the CALL / DT / DS button.
On incoming calls ring and flash the
CALL / DT / DS button.
Change dial tone to a higher pitch to
indicate that a phone status feature is
active (DND, Forward All, Station Lock,
etc).
Disable status feature activation
notification tone.
Generate a short burst of ring tone
when a call rings at another member of
the pickup group when PINGRING
SERVICE is set to ENABLE in
Home Page
USER INSTRUCTIONS
PART 1 MAY 2010
MMC 861.