Table of Contents
Advertisement
LAST NUMBER REDIAL
To redial the last outgoing telephone number you dialed, press the Func. soft but-
ton, scroll to Last Redial, or dial 19. Press OK.
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker button before you begin dialing.
2.
Redial does not apply to intercom calls.
SAVE NUMBER WITH REDIAL
While on a conversation, press the Func. soft button and select the Save/Repeat
option before hanging up to save the number you just dialed for later use.
To redial this saved number at any time, press the Func. soft button, scroll to
Save/Repeat, press OK button or dial 17. The same line will be selected for you.
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker button before you begin dialing.
2.
The saved telephone number is stored in memory until you save another
number.
3.
Redial does not apply to intercom calls.
AUTOMATIC REDIAL/RETRY
When you are making an outside call and you receive a busy signal, the system can
automatically redial the number for you. It will automatically redial at a pre-pro-
grammed interval for up to 15 attempts.
•
When you hear a busy signal, press the Retry (Auto Retry) button.
•
The system will reserve the line and automatically redial the same number for
you. You will hear the call being made through the keyset speaker. The micro-
phone is muted.
•
When the called party answers, lift the handset or press the flashing Speaker
to begin speaking.
NOTES:
1.
If you make another call, auto-redial is canceled.
2.
To cancel an auto-retry, lift and replace the handset.
PULSE TO TONE CHANGEOVER
When making an outside call on a dial pulse line, press #. All digits dialed after the
# with be sent as tones.
46
PAGING AND MESSAGING
MAKING AN INTERNAL PAGE
To make an announcement through the keyset speakers in the idle condition:
•
Lift the handset.
•
Press the Func. soft button, scroll to Page button, press OK or dial 55.
•
Dial the desired zone number 0, 1, 2, 3 or 4.
•
After the attention tone, make your announcement.
NOTES:
1.
If you have a dedicated page zone button, it is not necessary to press Page
and dial a zone number.
2.
If allowed by your system administrator you may be able to initiate a page
from a speakerphone by pressing the Page key or dialing 55 without lifting
the handset.
MAKING AN EXTERNAL PAGE
To make an announcement through the external paging speakers:
•
Lift the handset.
•
Press the Func. soft button, scroll to Page button, press OK or dial 55.
•
Dial the desired zone number 5, 6, 7 or 8—OR—dial 9 to page all external
zones.
•
After the attention tone, make your announcement.
NOTES:
1.
If you have a dedicated page zone button, it is not necessary to press Page
and dial a zone number.
2.
If allowed by your system administrator you may be able to initiate a page
from a speakerphone by pressing the Page key or dialing 55 without lifting
the handset.
ALL PAGE
To page all designated keysets in internal zone 0 and all external zones at the same
time:
•
Lift the handset.
•
Press the Func. soft button, scroll to Page button, press OK or dial 55.
Dial , or press the All Page button.
•
•
After the attention tone, make your announcement.
Home Page
47
Hide quick links:
Advertisement
Chapters
Table of Contents
