Placing Calls - Samsung OfficeServ SMT-i5243 User Manual

SECTION 3.
FREQUENTLY USED FEATURE
OPERATION
16
This section provides the basic operation of your Samsung Multimedia Telephone
SMT-i5220.
EXTENSION LOG IN & OUT
If enabled, your SMT-i5220 telephone may require you to log in before making or
receiving calls. In these cases your telephone system administrator will provide
you with an extension number, password, and the feature code used to log out.
TO LOG IN
• Dial your extension number in the ID field (example
3201).
• Press the OK button.
• Dial your password in the password field (example 1234).
• Press Save soft button.
TO LOG OUT
• Dial the feature code provided by your administrator (for example 77).

PLACING CALLS

IMPORTANT: Put your phone in Overlap Mode by pressing the Menu button,
select Settings and then select Application Set., press OK, select Call, press OK,
scroll to Dial Mode, change it to Overlap by using the Navigation Button. If your
phone is not in Overlap mode you must always press the Call soft button after
dialing the digits to send the call.
All examples of making phone calls are based on the phone being set for
NOTE:
overlap dialing mode.
OUTSIDE CALLS
To place a call to an outside party:
-
• Lift the handset.
• Press an idle outside line button, line group button, or dial a line access code
to receive dial tone.
• Dial the telephone number.
• Hang up the handset when the call is completed.
Frequently called telephone numbers can be added to the PhoneBook.
NOTE:
When making internal and external calls from AOM (programmable) list, press the
AOM soft button to access the programmable button screens. Then use the
Navigation button to scroll to and hightlight the desired programmable button.
Press OK to complete the call.
Home Page
[HOT DESKING]
17