Table of Contents
Advertisement
DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
•
With you handset on-hook, press Transfer and then dial 110.
•
Press 111 to turn DISP SPDNAME on or 110 to turn it off.
•
Press Transfer to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.
•
With you handset on-hook, press Transfer and then dial 110.
•
Press 121 to turn CID Review All on or 120 to turn it off.
•
Press Transfer to store your selection.
SECURE OHVA
This option allows you to receive OHVA (Over Head Voice Announce) calls via the
speaker while you are on the handset.
•
With your handset on hook, press Transfer and then dial 110.
•
Press 131 to turn SECURE OHVA ON or 130 to turn it OFF.
•
Press Transfer to save your selection.
CONFIGURE MOBILE EXTENSIONS
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from.The caller ID field has no effect unless you have been author-
ized as an Executive MOBEX user. Check with your telephone system administrator
for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the Right
soft key to confirm).
•
Press Right soft button to move to telephone number.
66
•
Dial the number of a C.O. line or trunk group to use when making calls to this
MOBEX port.
•
Dial the phone number you can be reached at by users calling this MOBEX
port.
•
Press Transfer to store your selection and exit programming.
To set the caller ID of the location you will be calling in from:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the Right
soft key to confirm).
•
Press Right soft button twice.
•
Dial the contact number.
•
Press Transfer to store your selection and exit programming.
To turn a MOBEX port ON or OFF:
•
Press Transfer and then dial 126.
•
Dial your station pass code.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+] or Volume Down [-] keys to select a port and press the Right
soft key to confirm).
•
Dial 2 to select the activation status option.
•
Dial 0 to turn the port on, dial 1 to turn the port off.
•
Press Transfer to store your selection and exit programming.
[MOBEX]
Home Page
67
Hide quick links:
Advertisement
Chapters
Table of Contents
