Cancelling Callback - Samsung OfficeServ SMT-i5243 User Manual

CANCELLING CALLBACK

A callback will be canceled if not answered within 30 seconds. If you have set a
callback, your CBK key will light.
Your phone may have a maximum of five callbacks to lines and/or stations set at
a time. To cancel a callback:
• Press the CBK key or dial 44. You will hear confirmation tone.
• While you are listening to confirmation tone, press the HOLD key.This will can-
cel the oldest set callback.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press SPK or the MONITOR key if you are using the 7B phone before dial-
ing.
12
INTERCOM CALLS
CALLING OTHER STATIONS
• Dial the extension number or group number.
• Wait for the party to answer. If you hear a brief tone burst instead of ringback
tone, the station you called is set for Voice Announce or Auto Answer. Begin
speaking immediately after the tone.
• Finish the call by replacing the handset or pressing the ANS/RLS or the MON-
ITOR key if you are using a 7B phone.
NOTES:
1. If you have a DSS key assigned to an extension or station group, you may press
this key instead of dialing the number. If you are using a 7 Button Set you must
pick up the handset to speak to the calling party.
2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK or the MONITOR key if you are using a 7B phone before you begin
dialing.
ANSWERING INTERCOM CALLS
• When your keyset rings, simply lift the handset—OR—press the ANS/RLS key
to be connected to the calling station. If you are using a 7B phone you must
pick up the handset to speak to the calling party.
• Finish the call by replacing the handset or pressing the ANS/RLS or the MON-
ITOR key if you are using a 7B phone.
See Ring Preference under Customizing Your Keyset.
VOICE ANNOUNCE MODE
When another station calls you, your keyset will sound a brief attention tone and
you will hear the caller's announcement.
• Press ANS/RLS to turn on the microphone and speak handsfree—OR— lift the
handset to reply.
• To finish the call, replace the handset or press the ANS/RLS key.
NOTE: In order for C.O. calls to be answered handsfree, AUTO ANS CO must be set
to ON.
Home Page
13