Table of Contents
Advertisement
•
Redial the new passcode. If successful, you will hear two beeps. Four beeps
indicate an incorrect code to confirm, reenter the code again.
•
Press Transfer to store the new passcode.
SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes
under Intercom Calls
for descriptions).
•
While on-hook, press Transfer and then dial 103.
•
Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
•
Press Transfer to store your selection.
NOTE: When your keyset is programmed for Voice Announce and you have For-
ward No Answer (FNA) turned on, you must answer screened transfers by pressing
the OK button before your FNA timer expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
•
While on-hook, press Transfer and then dial 110.
•
Dial 15 to access AUTO ANS CO.
•
Press the Volume Up [+] or Volume Down [-] key to change status.
•
Press Transfer to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line button, route button or a flashing Call but-
ton will automatically put your call on hold and connect you to the next call. This
feature can be turned on or off at your keyset.
•
With the handset on-hook, press Transfer and then dial 110.
•
Dial 001 to turn Automatic Hold on or 000 to turn it off.
•
Press Transfer to store your selection.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode, press the Speaker button to answer and Speaker button to
release calls.
•
With the handset on-hook, press Transfer and then dial 110.
•
Dial 021 to use the headset or 020 to use the handset.
•
Press Transfer to store your selection.
Your keyset is equipped with a Headset button. Pressing this button while the
indicator is off will cause the keyset to enter headset mode and the button indica-
64
(see Answering Intercom Calls
tor to be lit solid to indicate this. Pressing the button while the button indicator is
lit solid will cause the keyset to return to handset mode and the button indicator
will go off.
NOTE: If you need to switch between headset mode and handset mode (or speak-
er phone) during a conversation, you will need to put the call on hold first.
HOT KEYPAD
On your phone system your keyset's keypad can be made "live" or "hot" so that it is
not necessary to lift the handset or press the Speaker button before you begin di-
aling. Calls can be made and features activated by simply dialing the C.O. line num-
ber, trunk group access code, intercom number or feature access code.
•
With the handset on-hook, press Transfer and then dial 110.
•
Dial 031 to turn the Hot Keypad on or 030 to turn it off.
•
Press Transfer to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.
•
While on-hook, press Transfer and then dial 110.
•
Dial 040 to turn tones off or 041 to turn tones on.
•
Press Transfer to store your selection.
•
Additional ring tones can be selected from the Menu, Phone, Sound,
Keytone option.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:
•
With the handset on-hook, press Transfer and then dial 110.
•
Dial 051 to turn this feature on or 050 to turn it off.
•
Press Transfer to store your selection.
—OR—
•
Press the Menu button, scroll to Phone, press OK.
•
Scroll to Sound and press OK, scroll to Keytone, and press OK.
•
Using the Navigation button scroll to Select New Ring Tone, press Save soft
button.
Home Page
65
Hide quick links:
Advertisement
Chapters
Table of Contents
