Setting Station On/Off Options - Samsung OfficeServ SMT-i5243 User Manual

OfficeServ 7030
TECHNICAL MANUAL

1.12 SETTING STATION ON/OFF OPTIONS

The OfficeServ 7030 allows the system administrator to set any of the keyset features listed
below.
OPTION
00
01 NOT AVAILABLE IN THE USA
02
HEADSET USE
03
HOT KEYPAD
04
KEY TONE
05
PAGE REJOIN
06
RING PREF.
07 NOT AVAILABLE IN THE USA
08
AUTO CAMP-ON
09 NOT AVAILABLE IN THE USA
NAME VALUE
1 ON
AUTO
HOLD
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1 ON
0 OFF
1.16
DESCRIPTION
Automatically hold the current caller
before accessing another trunk or CALL
key.
Disconnect the current caller before
accessing another trunk or CALL key.
Enable headset mode operation.
Enable handset mode operation.
Allow dialing from an idle state.
Require the user to lift the handset or
press the speakerphone key before
dialing a number.
Generate a tone each time a key is
pressed on the keyset.
Disable key tone generation.
Connect to an in-process page after
disconnecting a caller.
Connect a page only if the keyset is idle
at the beginning of the page.
Allow the user to answer calls by lifting
the handset or pressing the
speakerphone button.
Require users to press a CALL / DT / DS
key in order to answer calls.
Automatically camp-on when calling to
a busy station.
Require the user to manually activate
the CAMP-ON feature.
Home Page
USER INSTRUCTIONS
PART 1 MAY 2010